10 lbs. Amy's Magic Slip. Cone 6-10 (Dry Material)
Description: The same great magic decorating slip I've had available for years. This is a porcelain slip, but it's not Coleman Porcelain. You can use Tom's porcelain as a slip. It works well for most slip decorating applications. Amy's Magic Slip is a different formula. This one has less silica than Coleman Porcelain. And, it has a different feldspar. And, it has a different kaolin. Other then that, you can use whichever porcelain slip you prefer. When you get a porcelain slip in a dry formula you can alsoweigh it and add oxides and pigments to it. It's just a mater of application.
Mixing: Add water to mix it as thick as possible like mud. Keep some of the dry material aside incase you add too much water to start with. Then, mix it with a drill and paddle. I use a 60 mesh bowl screen it once by pushing it thru by hand as thick as possible.
Application: As a thick slip it works best when you apply it to work that's just been thrown and ribbed. Do not cover the work with plastic to slow down it's drying! That's what makes it crack. You need to allow the water to evaporate off of the porcelain. Or, it sits and saturates the porcelain which is what causes it to crack. Just keep any breezes or drafts off of the work. Some people take a ware cart and cover the outside with plastic so it just keeps air off of the work, but the plastic isn't sitting directly on the work and the slip.
Compatibility: Porcelain Slip is compatible with a Porcelain body. The shrinkage is similar enough it sound work well. If the porcelain your using is made with a ball clay (instead of kaolin) it's not porcelain. Our other Magic Slip
Firing: From cone 6-10.