- Product Store
- >
- Dry Materials: Slips and Glazes Cone 10 Reduction
- >
- 5 lbs. Translucent Glaze (Green)
5 lbs. Translucent Glaze (Green)
Description: This glaze is called a 'pooling glaze'. It's formulated with a special silica that makes it an even deeper melt into a true porcelain body. This also works on Translucent Porcelain without crazing. Specifically Polar Ice (fired to cone 10 reduction), and our Translucent Porcelain that's offered on our Magic Slips page. It also works great on Coleman Porcelain, and Standard's cone 10 Porcelain.
Important Note 1: This is a "translucent" glaze. Which means it's color will be influenced by the color of the clay body it's on. This image shows the glaze on a cone 10 porcelain translucent porcelain clay body. If you put it onto a BMix or another less-white clay body without enough silica in the clay body- it won't be the same, brilliant color.
Important Note 2: We Only Bisque Porcelain to cone 010 (or, 1660 F). This is so important for all great results when working with porcelain! If that bisque is going to cone 04 - it's closing off the body before you even apply the glaze. Bisque firing to cone 04 is old info that's totally out dated. It was for rugged stoneware bodies that were dug up from the creek beds.
Mixing: One order equals 5 lbs. of dry glaze. Add water and screen 2 times through an 80 mesh screen. 42-45 on a hydrometer.
Application: Dip or Spray. It's better with a bit thicker application. Stable at cone 10 reduction.
Firing: Cone 10 reduction.
Important Note: Remember to run a few tests before applying any unfamiliar slip or glaze to lots of work. Take notes. ​Find the correct application for your work with the way your kiln is being fired.